PC plastový plech

PC plastic, full name Polycarbonate .

PC plastic is a kind of excellent comprehensive performance engineering plastics.It has excellent physical, mechanical, electrical, and thermal properties,so it's known as the "king of the transparent plastic '

C lassification :

Anti - static PC SHEET, conductive PC SHEET,fireproof PC SHEET,PC fiber - resistant, PC GF SHEET, PC+ABS SHEET,anti-ultraviolet ray resistance PC, food grade PC, anti - chemical PC.

Výhody:

1, lehká hmotnost

2, odolnost proti nárazu

3, vynikající fyzikální, mechanické, elektrické a tepelné vlastnosti

4, ultrafialový odpor

Nevýhody:

Polycarbonate is not resistant to ultraviolet light, no resistance to alkali, resistance to hydrolysis stability is not high, is the main performance defect is sensitive to the gap, resistance to organic chemistry, scratch resistance is poorer, long-term exposure to ultraviolet light yellow, are vulnerable to the erosion of some organic solvents.

Aplikace:

1. Distanční vložka bez prachu

2. Zařízení stínění a testovací svítidla;

3. komerční stavební osvětlení;

4. Zvukotěsné stěny;

5. skleník;

6. Komponenty pro lékařská a farmaceutická zařízení;

7. čelní štíty;

8. Skylights, etc

Modified use:

The purpose of the modified PC Plastic is to toughen, improve the processing performance, reduce the residual deformation, and increase the flame retardancy, etc.

PC/ABS can improve bending modulus, heat resistance and plating performance.

PC/PET and PBT can improve drug resistance and solvent resistance.

PC/PMMA added plexiglass to enhance the appearance of pearlescent color.

PC/PA and HIPS can improve impact toughness and surface finish.

PC/HDPE can improve water resistance, aging resistance, weather resistance and LDPE .

The PC Plastic USES fiberglass or carbon fiber to enhance modification and improve mechanical strength.

The flame retardant grade PC Plastic can be made with bromine flame retardant and antimony trioxide.

Other and polysulfone, aromatic polycarbonate, polyvinyl formaldehyde, polypropylen e, polystyrene can be modified to achieve the balance between economy and performance.

Charakteristiky spalování:

Combustion condition: easy, softening foaming

Flame status: small amount of black smoke

After the fire: out of the fire

Bouquet: no special taste

Specification : the thickness of PC Plastic sheet material can be produced from   0.3mm to 1.9mm, the normal width is 600mm, the   width cannot exceed 1200mm, the length is not limited.
The thickness of plate can be produced from 2mm to 180mm, the usual specification of 2-10mm is 1000mm* 2000mm, and the commonly used specification of 10-180mm is 600*1200 mm . PC Plastic sheet can also be customized according to requirements, and the width cannot exceed 1200mm, and the length is not limited.and The diameter of the PC Plastic rod can be produced from 2mm to 250mm, the   length is 1 meter, and it can be ordered to be more than 3 meters in length.

Color: Black and clear, can also be made another color, and the color order is 500KG.

Modified varieties: PC Plastic can be added to the glass fiber , copper powder, and molybdenum disulfide enhancement plate according to customer's requirements.
Přidejte antistatické činidlo na trvalou desku, hodnotu odolnosti objemu 10 až 6 až 9 energie.
Přidání zpomalovače hoření na desku zpomalující hoření z UL 94V-0 na HB spalovací stupeň a další požadavky na modifikace jsou nutné přizpůsobit různé další vlastnosti podle skutečného použití zákazníka.

Product certification: most environmental certification reports and safety reports for raw materials, such as   SGS report, CTI report, UL report, MSDS safety information, etc.